jvm采购模式（网卡设备scan及probe流程）

本文以X710网卡设备为例，介绍网卡的scan和probe流程的；通过本篇文章的介绍可以大致了解UIO驱动、PMD驱动之间的关联关系以及如何确认网卡对应的PMD驱动的针对probe流程处理了解得比较片面，有了解比较深的同学，希望能找您学习一下，今天小编就来说说关于jvm采购模式?下面更多详细答案一起来看看吧!

jvm采购模式

本文以X710网卡设备为例，介绍网卡的scan和probe流程的；通过本篇文章的介绍可以大致了解UIO驱动、PMD驱动之间的关联关系以及如何确认网卡对应的PMD驱动的。针对probe流程处理了解得比较片面，有了解比较深的同学，希望能找您学习一下。

1、BUS总线设备扫描

ret_bus_scan函数在目录dpdk/lib/librte_eal/common/eal_common_bus.c初始化流程在EAL环境初始化调用 ret_bus_scan函数完成的。内部会调用各自类型的bus->scan接口；目的是扫描所有该类型bus下注册的设备。下面有bus设备注册、以PCI设备的注册来详细说明注册流程。

• 1.1 Bus设备的注册

是由宏RTE_REGISTER_BUS，是一个构造函数，在程序main启动前完成的注册；将bus类型注册到全局结构rte_bus_list 链表上；目前有6种设备类型，本文主要关心网卡设备的。目前查询宏使用的地方如下。（对应宏所在文件：dpdk/lib/librte_eal/include/rte_bus.h）

/** * Helper for Bus registration. * The constructor has higher priority than PMD constructors. */ #define RTE_REGISTER_BUS(nm, bus) \ RTE_INIT_PRIO(businitfn_ ##nm, BUS) \ {\ (bus).name = RTE_STR(nm);\ rte_bus_register(&bus); \ } RTE_REGISTER_BUS(FSL_DPAA_BUS_NAME, rte_dpaa_bus.bus);/*drivers/bus/dpaa/dpaa_bus.c*/ RTE_REGISTER_BUS(FSLMC_BUS_NAME, rte_fslmc_bus.bus)/*drivers/bus/fslmc/fslmc_bus.c*/ RTE_REGISTER_BUS(IFPGA_BUS_NAME, rte_ifpga_bus);/*drivers/bus/ifpga/ifpga_bus.c*/ RTE_REGISTER_BUS(pci, rte_pci_bus.bus);/*drivers/bus/pci/pci_common.c*/ RTE_REGISTER_BUS(vdev, rte_vdev_bus)；/*drivers/bus/vdev/vdev.c*/ RTE_REGISTER_BUS(vmbus, rte_vmbus_bus.bus);/*drivers/bus/vmbus/vmbus_common.c*/

• 网卡设备BUS的注册 我们重点学习网卡设备的注册，网卡设备bus已经注册到全局变量rte_bus_list链表上。

/*网卡bus的全局变量*/ struct rte_pci_bus rte_pci_bus = { .bus = { /*网卡的struct rte_bus设备内容*/ .scan = rte_pci_scan, .probe = pci_probe, .find_device = pci_find_device, .plug = pci_plug, .unplug = pci_unplug, .parse = pci_parse, .dma_map = pci_dma_map, .dma_unmap = pci_dma_unmap, .get_iommu_class = rte_pci_get_iommu_class, .dev_iterate = rte_pci_dev_iterate, .hot_unplug_handler = pci_hot_unplug_handler, .sigbus_handler = pci_sigbus_handler, }, /*实例化网卡设备后下挂到尾队列链表中*/ .device_list = TAILQ_HEAD_INITIALIZER(rte_pci_bus.device_list), /*对应所有网卡的PMD驱动链表，下面重点说一下*/ .driver_list = TAILQ_HEAD_INITIALIZER(rte_pci_bus.driver_list), }; /*网卡设备注册*/ RTE_REGISTER_BUS(pci, rte_pci_bus.bus);

我们可以gdb 来打印看一下网卡设备注册后struct rte_bus 内容：

/*打印对应pci 内容*/ (gdb) p rte_bus_list.tqh_first[0].next.tqe_next[0].next.tqe_next[0].next.tqe_next[0] $7 = { next = {/*双向链表情况*/ tqe_next = 0x399cd40 <rte_vdev_bus>, tqe_prev = 0x399cb40 <rte_ifpga_bus> }, name = 0x33f0f9f "pci", /*注册时的name*/ scan = 0x485183 <rte_pci_scan>, probe = 0x489590 <rte_pci_probe>,/*最新的代码是pci_probe*/ find_device = 0x489a35 <pci_find_device>, plug = 0x489cf8 <pci_plug>, unplug = 0x489d26 <pci_unplug>, parse = 0x489835 <pci_parse>, dma_map = 0x489d90 <pci_dma_map>, dma_unmap = 0x489e76 <pci_dma_unmap>, conf = { scan_mode = RTE_BUS_SCAN_BLACKLIST }, get_iommu_class = 0x489fc8 <rte_pci_get_iommu_class>, dev_iterate = 0x488dc0 <rte_pci_dev_iterate>, hot_unplug_handler = 0x489bd6 <pci_hot_unplug_handler>, sigbus_handler = 0x489c70 <pci_sigbus_handler> }

• 网卡设备scan操作 在EAL环境初始化函数rte_eal_init()->rte_bus_scan()遍历全局变量rte_bus_list，调用对应bus回调函数scan。

int rte_bus_scan(void) { int ret; struct rte_bus *bus = NULL; /*遍历bus链表，执行相应bus的scan函数*/ TAILQ_FOREACH(bus, &rte_bus_list, next) { ret = bus->scan(); if (ret) RTE_LOG(ERR, EAL, "Scan for (%s) bus failed.\n", bus->name); } return 0; }

网卡设备rte_pci_scan(),函数的大致意思是打开并扫描目录“/sys/bus/pci/devices”下的PCI设备；一个目录名称表示一个pci设备；根据我们设置的网卡黑名单或白名单进行过滤，符合条件的设备，调用pci_scan_one实例化网卡设备rte_pci_device，并进行一些数据的填充（rte_pci_addr（网卡pci编号），struct rte_pci_id （网卡身份信息vendor_id、device_id来确定使用那个网卡驱动）max_vfs（sriov支持最大数量）、numa_node）。

pci_scan_one 函数只是实例化网卡设备并填充网卡的一些基本信息，并没有申请相应的资源，资源是由函数rte_bus_probe完成的。下面大概说一下具体操作流程。

1、打开目录并扫描目录“/sys/bus/pci/devices,”的网卡设备。

root@domain 0000:00:07.0]# cd /sys/bus/pci/devices/ [root@domain devices]# ls /*当前目录的pci设备编码如下*/ 0000:00:00.0 0000:00:01.0 0000:00:01.1 0000:00:01.2 0000:00:01.3 0000:00:02.0 0000:00:03.0 0000:00:04.0 0000:00:05.0 0000:00:06.0 0000:00:07.0 0000:00:08.0

2、通过lspci | grep Eth ，我们可以知道哪些是Eth网卡设备

[root@domain devices]# lspci | grep Eth /*但是只有四个数据以太网卡设备*/ 00:03.0 Ethernet controller: Red Hat, Inc. Virtio network device 00:04.0 Ethernet controller: Red Hat, Inc. Virtio network device 00:06.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP (rev 02) 00:07.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP (rev 02)

3、以PCi 0000:00:07.0为例，查看目录下的文件信息

root@domain 0000:00:07.0]# ls /*读取当前目录下文件，用来填充实例化后rte_pci_device 响应的字段*/ broken_parity_status consistent_dma_mask_bits dma_mask_bits enable local_cpulist modalias numa_node rescan resource0 resource3_wc subsystem_device uio class d3cold_allowed driver firmware_node local_cpus msi_bus power reset resource0_wc rom subsystem_vendor vendor config device driver_override irq max_vfs msi_irqs remove resource resource3 subsystem uevent

4、实例化网卡设备并填充相关信息，我们重点说明的有2个，后续使用：

1）当前网卡的驱动类型使用igb_uio还是vfio；enum rte_kernel_driver kdrv。

[root@domain 0000:00:07.0]# ls driver -l /*当前网卡驱动是igb_uio*/ lrwxrwxrwx 1 root root 0 7月 5 12:00 driver -> ../../../bus/pci/drivers/igb_uio

2）网卡物理资源初始化pci_parse_sysfs_resource来对资源进行填充mem_resource[6]

[root@domain 0000:00:07.0]# cat resource resource resource0 resource0_wc resource3 resource3_wc [root@domain 0000:00:07.0]# cat resource 0x00000000fc800000 0x00000000fcffffff 0x000000000014220c 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x00000000fd008000 0x00000000fd00ffff 0x000000000014220c 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x00000000fea80000 0x00000000feafffff 0x000000000004e200 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000

并且将实例化后的dev 添加到rte_pci_bus.device_list链表中，下面有通过全局找到我们的网卡设备。

5、通过全局rte_pci_bus.device_list找到对应的网卡0000:00:07.0，gdb 打印处填充内容。

(gdb) p rte_pci_bus.device_list.tqh_first.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next[0] $6 = { next = { /*用于在全局网卡rte_pci_bus.device_list链表挂接使用*/ tqe_next = 0x4d08b70, tqe_prev = 0x4cee8b0 }, device = { next = { tqe_next = 0x0, tqe_prev = 0x0 }, name = 0x4d02330 "0000:00:07.0", /*指向当前结构体的name字段*/ driver = 0x39b3e50 <rte_i40e_pmd 16>,/*对应的PMD驱动是i40E*/ bus = 0x399dc40 <rte_pci_bus>, /*全局的PCI bus 结构体*/ numa_node = 0, devargs = 0x0 }, addr = {/*pci编号分割后的赋值0000:00:07.0*/ domain = 0, bus = 0 '\000', devid = 7 '\a', function = 0 '\000' }, id = { class_id = 131072, /*对应系统文件的数值/sys/bus/pci/devices/0000:00:07.0/class*/ vendor_id = 32902, /*对应系统文件的数值/sys/bus/pci/devices/0000:00:07.0/vendor*/ device_id = 5490,/*对应系统文件的数值/sys/bus/pci/devices/0000:00:07.0/device*/ subsystem_vendor_id = 32902,/*对应系统文件的数值/sys/bus/pci/devices/0000:00:07.0/subsystem_vendor*/ subsystem_device_id = 0/*对应系统文件的数值/sys/bus/pci/devices/0000:00:07.0/subsystem_device*/ }, mem_resource = {{ /*对应资源文件中的内容/sys/bus/pci/devices/0000:00:07.0/resource*/ phys_addr = 4236247040,/*物理地址和len是在scan的时候读取资源文件填充的*/ len = 8388608, /*对应资源的文件大小 /sys/bus/pci/devices/0000:00:07.0/resource0*/ addr = 0x7f7c0080d000 /*虚拟地址是在probe函数调用的时候填充的*/ }, { phys_addr = 0, len = 0, addr = 0x0 }, { phys_addr = 0, len = 0, addr = 0x0 }, { phys_addr = 4244668416, len = 32768, /*对应资源的文件大小 /sys/bus/pci/devices/0000:00:07.0/resource3*/ addr = 0x7f7c0100d000 }, { phys_addr = 0, len = 0, addr = 0x0 }, { phys_addr = 0, len = 0, addr = 0x0 }}, intr_handle = { { vfio_dev_fd = 25, uio_cfg_fd = 25 /*uio配置文件描述符号，对应文件/sys/class/uio/uio1/device/config*/ }, fd = 24, /*文件描述符，对应文件 /dev/uio1*/ type = RTE_INTR_HANDLE_UIO,/*表示当前使用的是 igb——uio 驱动*/ max_intr = 0, nb_efd = 0, efd_counter_size = 0 '\000', efds = {0 <repeats 512 times>}, elist = {{ status = 0, fd = 0, epfd = 0, epdata = { event = 0, data = 0x0, cb_fun = 0x0, cb_arg = 0x0 } } <repeats 512 times>}, intr_vec = 0x0 }, driver = 0x39b3e40 <rte_i40e_pmd>, max_vfs = 0,/*sriov VF的个数*/ kdrv = RTE_KDRV_IGB_UIO, /*表示当前使用的是 igb_uio 驱动*/ name = "0000:00:07.0\000\000\000\000\000",/*当前网卡pci编号*/ vfio_req_intr_handle = { { vfio_dev_fd = 0, uio_cfg_fd = 0 }, fd = 0, type = RTE_INTR_HANDLE_UNKNOWN, max_intr = 0, nb_efd = 0, efd_counter_size = 0 '\000', efds = {0 <repeats 512 times>}, elist = {{ status = 0, fd = 0, epfd = 0, epdata = { event = 0, data = 0x0, cb_fun = 0x0, cb_arg = 0x0 } } <repeats 512 times>}, intr_vec = 0x0 } }

2、网卡驱动注册

网卡驱动注册宏在drivers/bus/pci/rte_bus_pci.h文件中具体如下：

/*将驱动PMD添加到全局驱动链表中rte_pci_bus.driver_list，在probe函数中会使用*/ void rte_pci_register(struct rte_pci_driver *driver); /** Helper for PCI device registration from driver (eth, crypto) instance */ #define RTE_PMD_REGISTER_PCI(nm, pci_drv) \ RTE_INIT(pciinitfn_ ##nm) \ {\ (pci_drv).driver.name = RTE_STR(nm);\ rte_pci_register(&pci_drv); \ } \

下面是i40e网卡注册，主要是有个全局变量pci_id_i40e_map，存储的是网卡的id信息；在probe函数中通过通过struct rte_pci_id 中的vendor_id、device_id来匹配到当前的驱动。

tatic struct rte_pci_driver rte_i40e_pmd = { .id_table = pci_id_i40e_map, /*是个全局遍量通过struct rte_pci_id 中的vendor_id、device_id来匹配到当前的驱动*/ .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC, .probe = eth_i40e_pci_probe, .remove = eth_i40e_pci_remove, }; RTE_PMD_REGISTER_PCI(net_i40e, rte_i40e_pmd); RTE_PMD_REGISTER_PCI_TABLE(net_i40e, pci_id_i40e_map); RTE_PMD_REGISTER_KMOD_DEP(net_i40e, "* igb_uio | uio_pci_generic | vfio-pci");

举例如下：我当前的X710网卡的vendor和device信息如下，正好可以匹配到pci_id_i40e_map表中。

[root@domain 0000:00:07.0]# cat vendor 0x8086 [root@domain 0000:00:07.0]# cat device 0x1572

pci_id_i40e_map表中对应的vendor和device信息如下：

/*pci_id_i40e_map{ RTE_PCI_DEVICE(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_SFP_XL710) }*/ /* Vendor ID */ #define I40E_INTEL_VENDOR_ID 0x8086 /* Device IDs */ #define I40E_DEV_ID_SFP_XL710 0x1572

通过rte_pci_bus.driver_list遍历到rte_i40e_pmd并打印rte_i40e_pmd信息如下：

(gdb) p rte_pci_bus.driver_list.tqh_first.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next.next.tqe_next $1 = (struct rte_pci_driver *) 0x39b3e40 <rte_i40e_pmd> (gdb) p *$1 $3 = { next = { tqe_next = 0x39b3ec0 <rte_i40evf_pmd>, tqe_prev = 0x39b3500 <rte_hns3vf_pmd> }, driver = { next = { tqe_next = 0x0, tqe_prev = 0x0 }, name = 0x34abd6e "net_i40e", alias = 0x0 }, bus = 0x399dc40 <rte_pci_bus>, probe = 0x1561c12 <eth_i40e_pci_probe>, remove = 0x1561e4e <eth_i40e_pci_remove>, dma_map = 0x0, dma_unmap = 0x0, id_table = 0x34aae20 <pci_id_i40e_map>, drv_flags = 9 }

3 网卡probe处理流程

DPDK通过内核的UIO机制将硬件资源(MMIO, IO，interrupt)映射到用户态。可以参考博客（https://blog.csdn.net/whenloce/article/details/88374867）

3.1 通过igb_uio驱动来映射到用户态

uio驱动在目录kernel/linux/igb_uio/igb_uio.c中。在dpdk EAL初始化中通过调用rte_bus_probe（目录文件lib/librte_eal/common/eal_common_bus.c）函数来完成的。下面我们来简单分析一下。

在用户态pci driver probe过程中，如果driver设置了RTE_PCI_DRV_NEED_MAPPING标记，就会执行地址映射，对应函数调用如下：

rte_bus_probe()-> /*遍历rte_pci_bus.device_list链表调用pci_probe_all_drivers */ pci_probe(drivers/bus/pci/pci_common.c)-> /*遍历全局网卡驱动链表rte_pci_bus.driver_list链表和当前网卡的struct rte_pci_id 信息来匹配确定相应的的驱动PMD，驱动已经在设备启动是注册完成*/ pci_probe_all_drivers()->rte_pci_probe_one_driver()-> rte_pci_match()/*网卡驱动匹配函数*/ rte_pci_map_device()/*通过igb_uio 来给当前设备映射资源mem_resource[6]*/ pci_uio_map_resource()->pci_uio_alloc_resource() /*读取目录/sys/bus/pci/devices/0000:00:07.0/uio下目录uio1，获取uio num = 1， *进入uio1目录读取dev文件获取主次设备号，创建字符设备，具体看下面链接。*/ pci_get_uio_dev() /*scan模块读取mem_resource资源物理地址和大小，这里为资源mmap虚拟地址*/ pci_uio_map_resource_by_index() dr->probe=eth_i40e_pci_probe() /*网卡驱动probe*/

1）pci_get_uio_dev 读取主次设备号及uio编号，创建/dev/uio1 字符设备。

[root@domain uio]# pwd /sys/bus/pci/devices/0000:00:07.0/uio [root@domain uio]# ls uio1 /*1、读取uio文件，来获取uio_num = 1*/ [root@domain uio]# cd uio1/ [root@domain uio1]# ls dev device event maps name power subsystem uevent version [root@domain uio1]# cat dev 242:1 /* 2、create the char device "mknod /dev/uioX c major minor" 获取主设备和次设备好，创建字符设备 snprintf(filename, sizeof(filename), "/dev/uio%u", uio_num); dev = makedev(major, minor); ret = mknod(filename, S_IFCHR | S_IRUSR | S_IWUSR, dev);*/ [root@domain uio1]# ls /sys/dev/char/ -l | grep uio lrwxrwxrwx 1 root root 0 7月 12 13:45 242:0 -> ../../devices/pci0000:00/0000:00:06.0/uio/uio0 lrwxrwxrwx 1 root root 0 7月 12 13:45 242:1 -> ../../devices/pci0000:00/0000:00:07.0/uio/uio1 lrwxrwxrwx 1 root root 0 7月 12 13:45 242:2 -> ../../devices/pci0000:00/0000:00:04.0/uio/uio2 [root@domain uio1]# ls /dev/uio1 /*mknod*/ /dev/uio1

3.2 网卡资源链表管理

全局变量rte_uio_tailq是用来管理网卡通过igb驱动map后的资源链表。由函数pci_uio_map_resource_by_index()来完成在大页中找一个靠近结尾的地址，根据mem长度使用mmap(pci_map_resource)进行映射。

(gdb) p rte_uio_tailq.head[0] /*全局资源尾队列头*/ $7 = { tailq_head = { tqh_first = 0x7f577fd9e200, tqh_last = 0x7f577fbb6c00 }, name = "UIO_RESOURCE_LIST", '\000' <repeats 14 times> } /*查询到PCI：0000:00:07.0对应mapped_pci_resource资源，gdb输出map资源信息*/ (gdb) p (struct mapped_pci_resource)rte_uio_tailq.head->tailq_head.tqh_first.next.tqe_next.next.tqe_next.next.tqe_next $18 = { next = { tqe_next = 0x0, tqe_prev = 0x7f577fd83dc0 }, pci_addr = { domain = 0, bus = 0 '\000', devid = 7 '\a', function = 0 '\000' }, path = "/dev/uio1", nb_maps = 2, maps = {{ addr = 0x7f7c0080d000, path = 0x7f577fbb5b80 "/sys/bus/pci/devices/0000:00:07.0/resource0", offset = 0, size = 8388608, phaddr = 4236247040 }, { addr = 0x7f7c0100d000, path = 0x7f577fbb4b00 "/sys/bus/pci/devices/0000:00:07.0/resource3", offset = 0, size = 32768, phaddr = 4244668416 }, }, msix_table = { bar_index = 0, offset = 0, size = 0 } } (gdb)

3.3 eth_i40e_pci_probe 代码待深入分析

retval = rte_eth_dev_create(&pci_dev->device, pci_dev->device.name, sizeof(struct i40e_adapter), eth_dev_pci_specific_init, pci_dev, eth_i40e_dev_init, NULL) (gdb) p rte_eth_devices[2] $30 = { rx_pkt_burst = 0x170be9b <i40e_recv_scattered_pkts_vec>, /*收包函数*/ tx_pkt_burst = 0x16a47cb <i40e_xmit_pkts>, /*发包函数*/ tx_pkt_prepare = 0x16c2900 <i40e_prep_pkts>,/*发包前的对报文的预处理函数*/ data = 0x7f577fda2d80, /*对应全局共享数据rte_eth_dev_shared_data->data[2]*/ process_private = 0x0, dev_ops = 0x398fa20 <i40e_eth_dev_ops>, /*驱动ops函数集合*/ device = 0x4cfba20, intr_handle = 0x4cfbb00, link_intr_cbs = { tqh_first = 0x0, tqh_last = 0x3f50700 <rte_eth_devices 33216> }, post_rx_burst_cbs = {0x0 <repeats 1024 times>}, pre_tx_burst_cbs = {0x0 <repeats 1024 times>}, state = RTE_ETH_DEV_ATTACHED, security_ctx = 0x0, reserved_64s = {0, 0, 0, 0}, reserved_ptrs = {0x0, 0x0, 0x0, 0x0} } (gdb) p rte_eth_dev_shared_data->data[2] $22 = { name = "0000:00:07.0", rx_queues = 0x7f577fb3ed00, tx_queues = 0x7f577fcfd880, nb_rx_queues = 1, nb_tx_queues = 3, sriov = { active = 0 '\000', nb_q_per_pool = 0 '\000', def_vmdq_idx = 0, def_pool_q_idx = 0 }, dev_private = 0x7f577fbb2940, dev_link = { link_speed = 10000, link_duplex = 1, link_autoneg = 1, link_status = 1 }, dev_conf = { link_speeds = 3888, rxmode = { mq_mode = ETH_MQ_RX_NONE, max_rx_pkt_len = 9220, max_lro_pkt_size = 0, split_hdr_size = 0, offloads = 2048, reserved_64s = {0, 0}, reserved_ptrs = {0x0, 0x0} }, txmode = { mq_mode = ETH_MQ_TX_NONE, offloads = 32780, pvid = 0, hw_vlan_reject_tagged = 0 '\000', hw_vlan_reject_untagged = 0 '\000', hw_vlan_insert_pvid = 0 '\000', reserved_64s = {0, 0}, reserved_ptrs = {0x0, 0x0} }, lpbk_mode = 0, rx_adv_conf = { rss_conf = { rss_key = 0x0, rss_key_len = 0 '\000', rss_hf = 0 }, vmdq_dcb_conf = { nb_queue_pools = (unknown: 0), enable_default_pool = 0 '\000', default_pool = 0 '\000', nb_pool_maps = 0 '\000', pool_map = {{ vlan_id = 0, pools = 0 } <repeats 64 times>}, dcb_tc = "" }, dcb_rx_conf = { nb_tcs = (unknown: 0), dcb_tc = "" }, vmdq_rx_conf = { nb_queue_pools = (unknown: 0), enable_default_pool = 0 '\000', default_pool = 0 '\000', enable_loop_back = 0 '\000', nb_pool_maps = 0 '\000', rx_mode = 0, pool_map = {{ vlan_id = 0, pools = 0 } <repeats 64 times>} } }, tx_adv_conf = { vmdq_dcb_tx_conf = { nb_queue_pools = (unknown: 0), dcb_tc = "" }, dcb_tx_conf = { nb_tcs = (unknown: 0), dcb_tc = "" }, vmdq_tx_conf = { nb_queue_pools = (unknown: 0) } }, dcb_capability_en = 0, fdir_conf = { mode = RTE_FDIR_MODE_NONE, pballoc = RTE_FDIR_PBALLOC_64K, status = RTE_FDIR_NO_REPORT_STATUS, drop_queue = 0 '\000', mask = { vlan_tci_mask = 0, ipv4_mask = { src_ip = 0, dst_ip = 0, tos = 0 '\000', ttl = 0 '\000', proto = 0 '\000' }, ipv6_mask = { src_ip = {0, 0, 0, 0}, dst_ip = {0, 0, 0, 0}, tc = 0 '\000', proto = 0 '\000', hop_limits = 0 '\000' }, src_port_mask = 0, dst_port_mask = 0, mac_addr_byte_mask = 0 '\000', tunnel_id_mask = 0, tunnel_type_mask = 0 '\000' }, flex_conf = { nb_payloads = 0, nb_flexmasks = 0, flex_set = {{ type = RTE_ETH_PAYLOAD_UNKNOWN, src_offset = {0 <repeats 16 times>} }}, flex_mask = {{ flow_type = 0, mask = "" } <repeats 24 times>} } }, intr_conf = { lsc = 0, rxq = 0, rmv = 0 } }, mtu = 1500, min_rx_buf_size = 2176, rx_mbuf_alloc_failed = 0, mac_addrs = 0x7f577fb30500, mac_pool_sel = {0 <repeats 128 times>}, hash_mac_addrs = 0x0, port_id = 2, promiscuous = 1 '\001', scattered_rx = 1 '\001', all_multicast = 1 '\001', dev_started = 1 '\001', lro = 0 '\000', rx_queue_state = "\001", tx_queue_state = "\001\001\001", dev_flags = 3, kdrv = RTE_KDRV_IGB_UIO, numa_node = 0, vlan_filter_conf = { ids = {0 <repeats 64 times>} }, owner = { id = 0, name = "" }, representor_id = 0, reserved_64s = {0, 0, 0, 0}, reserved_ptrs = {0x0, 0x0, 0x0, 0x0} }

4、总结

本文只是简单介绍了网卡设备及PMD驱动的探测,并且实例化网卡设备；利用igb_uio驱动将网卡设备的IO及中断资源映射到用户态。但是对eth_i40e_pci_probe()函数还需要深入研究.

,