华为交换机如何开ssh功能（配置通过stelnet用ssh远程登录华为交换设备命令）

1.配置管理IP：

<HUAWEI>system-view [HUAWEI]int vlanif 1 [HUAWEI-Vlanif1]ip address 172.16.0.254 24 [HUAWEI-Vlanif1]quit

1.配置管理IP界面

2.配置VTY用户及权限等级：

[HUAWEI]user-interface vty 0 4 [HUAWEI-ui-vty0-4]authentication-mode aaa [HUAWEI-ui-vty0-4]protocol inbound ssh [HUAWEI-ui-vty0-4]user privilege level 15 [HUAWEI-ui-vty0-4]quit

2.配置VTY用户界面

3.开启stelnet并新建ssh用户和密码：

[HUAWEI]stelnet server enable [HUAWEI]ssh user huawei [HUAWEI]ssh user huawei service-type stelnet [HUAWEI]ssh user huawei authentication-type password [HUAWEI]aaa [HUAWEI-aaa]local-user huawei password irreversible-cipher admin@huawei.com [HUAWEI-aaa]local-user huawei privilege level 15 [HUAWEI-aaa]local-user huawei service-type ssh [HUAWEI-aaa]quit

3.开启stelnet并新建ssh配置界面

4.V200R020或V200R021以上版本远程无法登录，ssh绑定所有端口命令：

[HUAWEI]ssh server-source all-interface Warning: SSH server source configuration will take effect in the next login. Continue? [Y/N]:y Warning: It expandes the range of accessed Ip.

4.ssh绑定所有端口命令配置界面

5.修改ssh默认端口配置命令：

[HUAWEI]ssh server port 9022 Warning: The operation will disconnect all online users. Continue? [Y/N]:y Info: Succeeded in changing SSH listening port.

5.修改ssh默认端口配置界面

6.验证ssh服务配置命令：

[HUAWEI]dis ssh server status

验证ssh服务配置界面

7.配置保存命令：

<HUAWEI>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name (*.cfg, *.zip ) [vrpcfg.zip]: flash:/vrpcfg.zip exists, overwrite?[Y/N]:y Save the configuration successfully <HUAWEI>

7.配置保存命令界面

8.ssh远程登录高版本第一次登录需要修改配置的初始密码：

初始密码是第3步配置的密码，修改初始密码后别忘记保存配置。

8.修改初始密码界面